47 Photos
1997 Power Curber 5700-B Curb and Gutter Machine
Located
Albuquerque, NM
Albuquerque, NM
Usage
3,624 hrs
3,624 hrs
Serial number
57B0397809
57B0397809
Loading...
Detailed equipment information
Protected by IronClad Assurance
This lot has been given an extensive inspection by an industry expert. If you find it's not as described, file a dispute and we'll make it right.
ID number
#15516946
In yard
No
Features
2 ft 10 in Trimmer, 12 in Triple Grouser Track Shoes
General Appearance
Serial Number / VIN
57B0397809
Hour Meter / Odometer
3624 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Paint
Steps/Ladders
Hand Rails
Safety
Horn
Inoperable
Current Safety Manual
Current Operator/Maintenance Manual
Control Station - Small
Gauges
Operational
Engine Oil Pressure
The fault indicator shuts off after the engine oil pressure rises.
Limited Function Check
The main components are in place and operational as noted.
Engine
Blow-by (subjective visual observation)
No noticeable vapor or pressure
Starter
Operational
Exhaust System
Radiator
Oil Leaks
No dripping leaks
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
Limited Function Check
The engine started but did not run smoothly. After running a short time engine shuts down.
Drivetrain
Drive Motors
Final Drives
Limited Function Check
The drivetrain was operational.
Chassis
Leg Condition
Leg Slide Wear Plates
Trimmer
Limited Function Check
The main chassis components functioned when checked without a load.
Steering Linkage
Brake Type
Hydrostatic
Limited Function Check - Brakes
The brake system functioned, stopping and holding the machine.
Frame Condition
Limited Function Check - Chassis
The main components were operational when checked without a load.
Wheel Condition
Wheel Studs
Hydraulics
Pumps (Hydraulics)
Hydraulic Motors
Valves
Hydraulic Tank
Hoses
Cylinder(s)
Cylinder Pins and Bushings
Limited Function Check
The hydraulic system was operational.
Undercarriage
Track Tensioners
Operational
Track Pads
Grouser Height
Left Side: 12 mm
Track link wear
Pins and Bushings Rotated?
No
Track rollers wear
Idlers
Sprockets
No visible issues
Oil Sample Analysis
Oil Sample Analysis
| engine | |
|---|---|
| date of analysis | Jul 10, 2026 |
| Silicon | 0.08 PPM |
| Tin | 0 PPM |
| Silver | 0.02 PPM |
| Aluminum | 0 PPM |
| Chromium | 1.37 PPM |
| Lead | 2.57 PPM |
| Copper | 1.45 PPM |
| Nickel | 0.03 PPM |
| Iron | 3.34 PPM |
| Glycol | NEG |
| Water | NEG |
| Fuel | <5% |
Additional information
Terms of Bidding and Sale
Payment
Items must be paid in full by Wednesday, 8 January 3000. Late fees will be applied after due date.
Shipping and pick up
- Buyers cannot remove their purchases from the auction site until their invoice is paid in full.
- Drivers must bring a copy of the Ritchie Bros. Auctioneers release ticket to pick up the item.
- We've partnered with trusted shipping vendors to make it easy for you to find the best transporters at the lowest prices. Request free quotes or get instant shipping estimates from our vendor’s websites.
Get a quote
Get your equipment to where it needs to be with Ritchie Bros.' full-service door-to-door logistics and shipping solutions. We take care of every step of the journey with our all-inclusive service to get your equipment across borders, continents and oceans quickly and efficiently
General
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Functions
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Dimensions
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.