



89 Photos
Located
Peachtree City, GA
Peachtree City, GA
Usage
701 hrs
701 hrs
Serial number
PY1120CC0050
PY1120CC0050
Loading...
Protected by IronClad Assurance
This lot has been given an extensive inspection by an industry expert. If you find it's not as described, file a dispute and we'll make it right.
ID number
#15639855
In yard
No
Features
Enclosed Cab, Air Conditioner, Air Ride Seat, Rear View Camera, Differential Lock, 2017 US EPA Label, Requires Diesel Exhaust Fluid, 14 ft / 4.27 m Moldboard, Front Auxiliary Hydraulics, Ripper, Rear Auxiliary Hydraulics, 17.5-25 Tires















Serial Number / VIN
PY1120CC0050
Hour Meter / Odometer
701 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Paint
Exterior Lights Functional
Operational

Travel Alarm
Operational
Horn
Operational
Seat belts
Operational
Safety lock out/stop
Operational
Current Safety Manual
Current Operator/Maintenance Manual















Seats/armrests
Steering Controls
Hydraulic Controls
Auxiliary Hydraulic Control
Powertrain controls
Dash Console
Engine Oil Pressure
The gauge registers in the operating range.
Engine Warning Lights
Operational
Gauges
Operational
Air Conditioner
Operational
Heater
Operational
Limited Function Check
The main components are in place and operational as noted.










Engine
2017 US EPA Label, Requires Diesel Exhaust Fluid
Emission Label
A/C Compressor
Operational
Blow-by (subjective visual observation)
Visible
Starter
Operational
Exhaust System
Radiator
Oil Leaks
No dripping leaks
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
DEF / AdBlue Tank
Limited Function Check
The engine started and ran.



Transmission
Operational
Rear Tandems (Chain Drives)
Limited Function Check
The drivetrain was operational.
















Pumps (Hydraulics)
Valves
Hydraulic Tank
Hoses (Hydraulics)
Minor cracking
Articulation Cylinders
Hydraulic Motors
Blade Lift Cylinders
Blade Angle Cylinders
Blade Side Shift Cylinders
Saddle Positioning Cylinder
Saddle Lock Pin
Operational
Steering Cylinders
Wheel Lean Cylinders
Limited Function Check
The hydraulic system was operational.
























Y-frame
Y-frame Pivot Trunnion
Wear
Blade Tilt Frame (saddle)
Circle Frame and Brackets
Circle Wear Strips
Not visible
Circle Support Brackets
Circle Gear Box
Circle Gear
Mold Board Slide Wear Strips
Articulating Center Pins Wear
Front Axle Oscillating Pin Wear
Steering Linkage
Wheel Tilt Linkage
Belly pans
Limited Function Check (grader)
The main chassis components were operational in a limited check.
Master Cylinder/Brake Control
Brake Lines/Hoses
Park Brake
Stopped the machine while rolling
Limited Function Check - Brakes
The brake system functioned, stopping and holding the machine.
Frame Condition
Tire Brands
Advance
Left Rear Drive Tires
Wheel Condition
Wheel Studs, Nuts, Lugs





Blade Condition
Blade Cutting Edge Condition
Worn
Ripper
Oil Sample Analysis
| engine | |
|---|---|
| date of analysis | Aug 12, 2026 |
| Silicon | 1.27 PPM |
| Tin | 1.46 PPM |
| Silver | 0.27 PPM |
| Aluminum | 0.22 PPM |
| Chromium | 0.26 PPM |
| Lead | 0.55 PPM |
| Copper | 39.59 PPM |
| Nickel | 0.44 PPM |
| Iron | 31.9 PPM |
| Glycol | NEG |
| Water | NEG |
| Fuel | <5% |
Items must be paid in full by Wednesday, 8 January 3000. Late fees will be applied after due date.
Get your equipment to where it needs to be with Ritchie Bros.' full-service door-to-door logistics and shipping solutions. We take care of every step of the journey with our all-inclusive service to get your equipment across borders, continents and oceans quickly and efficiently
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.