77 Photos
2018 Morbark 4600 Horizontal Grinder
Located
Gainesville, FL
Gainesville, FL
Usage
8,475 hrs
8,475 hrs
Serial number
1881177
1881177
Loading...
Detailed equipment information
Protected by IronClad Assurance
This lot has been given an extensive inspection by an industry expert. If you find it's not as described, file a dispute and we'll make it right.
ID number
#15654530
In yard
No
Features
US EPA Label, Cat C27 12 Cylinder Diesel Engine, 60 in Feeder, 60 in Rotor, 36 in Discharge Conveyor, Tri/A Carrier, Spring Suspension, Hydraulic Leveling
General Appearance
Serial Number / VIN
1881177, The serial number is not legible. This unit may be difficult to export.
CE Mark
No CE mark found
Hour Meter / Odometer
8475 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Paint
Sheet metal (fiberglass) condition
Steps/Ladders
Hand Rails
Exterior Lights Functional
Not operationally checked
Safety
Current Safety Manual
Current Operator/Maintenance Manual
Control Station
Hydraulic Controls
Oil Pressure
The gauge registers in the operating range. 66 PSI
Engine Warning Lights
Operational
Gauges
Operational
Limited Function Check
The main components are in place and operational as noted.
Engine
Emissions Status
US EPA Label
Emission Label
Blow-by (subjective visual observation)
Minor
Starter
Operational
Exhaust System
Radiator
Oil Leaks
No dripping leaks
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
Limited Function Check
The engine started and ran.
Chassis
Feeder Chute
Feed Table
14 long x 60 wide feed table
Feeder Drum
Discharge Conveyor Condition
Chassis
Chassis
Axle Condition
Springs/Hangers Condition
Brake Lines/Hoses
Not operationally checked
Limited Function Check - Brakes
The brakes were not operationally checked.
Tyre Condition
Tires
Left front outer: 14 /32", Left middle outer: 14 /32", Left rear outer: 14 /32", Right rear outer: 14 /32", Right middle outer: 14 /32", Right front outer: 14 /32"
Wheel Condition
Wheel Studs
Tongue/ Hitch Condition
No visible damage
Landing Gear / Tongue Jack
Lights/wiring Condition
Not operationally checked
Marker Lights Functional
Not operationally checked
Brake Lights Functional
Not operationally checked
Hydraulics
Pumps (Hydraulics)
Hydraulic Motors
Dripping leak, Engine Fan Motor is leaking
Valves
Hydraulic Tank
Hoses
Cylinder(s)
Cylinder Pins and Bushings
Limited Function Check
The hydraulic system was operational.
Additional information
Terms of Bidding and Sale
Payment
Items must be paid in full by Wednesday, 8 January 3000. Late fees will be applied after due date.
Shipping and pick up
- Buyers cannot remove their purchases from the auction site until their invoice is paid in full.
- Drivers must bring a copy of the Ritchie Bros. Auctioneers release ticket to pick up the item.
- We've partnered with trusted shipping vendors to make it easy for you to find the best transporters at the lowest prices. Request free quotes or get instant shipping estimates from our vendor’s websites.
Get a quote
Get your equipment to where it needs to be with Ritchie Bros.' full-service door-to-door logistics and shipping solutions. We take care of every step of the journey with our all-inclusive service to get your equipment across borders, continents and oceans quickly and efficiently
General
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Functions
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Dimensions
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.