99 Photos
Maltby, L3, GBR
3,748 hrs
CAT000D5TRG900341
This lot is protected by IronClad Assurance
Buy with confidence knowing that this lot has been given a full and detailed inspection by a qualified inspector.
ID number
#12855369
In yard
Yes
Year
2020
Manufacturer
Model
Asset type
Serial number or VIN
CAT000D5TRG900341
Features
Enclosed Cab, Air Conditioner, Rear View Camera, Air Ride Seat, Pre-Wired for Grade Control, Requires AdBlue, 4120 mm Wide PAT Blade, Auto Lube, 860 mm Single Grouser Track Shoes
Picture, Left Front Corner
Picture, Left Rear Corner
Picture, Right Rear Corner
Picture, Right Front Corner
Serial Number / VIN
CAT000D5TRG900341
CE Mark
CE Marked
Hour Meter / Odometer
3748 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Paint
Glass
Exterior Lights Functional
Operational
Travel Alarm
Operational
Horn
Operational
Seat belts
Operational
Safety lock out/stop
Operational
Current Safety Manual
Current Operator/Maintenance Manual
Seats/armrests
Mirrors
Steering Controls
Hydraulic Controls
Auxiliary Hydraulic Control
Powertrain controls
Dash Console
Engine Oil Pressure
The fault indicator shuts off after the engine oil pressure rises.
Engine Warning Lights
Operational
Gauges
Operational
Air Conditioner
The ambient temperature is too cold to check
Heater
Operational
Limited Function Check
The main components are in place and operational as noted.
Engine
No US EPA Label Present Requires AdBlue
A/C Compressor
In place; ambient temperature too cold to check operation
Blow-by (subjective visual observation)
No noticeable vapor or pressure
Starter
Operational
Exhaust System
Radiator
Oil Leaks
No dripping leaks
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
DEF / AdBlue Tank
Limited Function Check
The engine started and ran.
Transmission
Service Brakes
Final Drives
Limited Function Check (Drivetrain-Track)
The drivetrain was operational without a load.
Pumps (Hydraulics)
Valves
Hydraulic Tank
Hoses (Hydraulics)
Auxiliary Hydraulic Plumbing
Capped off, Not operationally checked
Blade Lift Cylinders
Blade Angle Cylinders
Blade Tilt Cylinders
Limited Function Check
The hydraulic system was operational.
Blade Condition
Blade Cutting Edge Condition
Push arm/C-frame condition
Push Arm Trunnions
Tilt/angle Linkage Pins and Bushings
Angle Linkage Pins and Bushings
Blade Trunnions/bushings
Shims remaining
Limited Function Check (dozer)
The main components were operational in a limited check.
Frame Condition
Belly pans
Pivot Shafts
Equalizer Bar Pivot Wear
Left Roller Frame
Left Track Tensioner
Left Track Pads
Left Grouser Height
40 mm
Left Track Links
Left Track Bushings
Bushings have not been turned
Left Carrier Rollers
Left Track Rollers
Rock guards fitted
Left Front Idler
Left Rear Idler
Left Sprocket
Right Roller Frame
Right Track Tensioner
Right Track Pads
Right Grouser Height
40 mm
Right Track Links
Right Track Bushings
Bushings have not been turned
Right Carrier Rollers
Right Track Rollers
Rock guards fitted
Right Front Idler
Right Rear Idler
Right Sprocket
Items must be paid in full by Wednesday, 7 January 2032. Late fees will be applied after due date.
Payment optionsGet your equipment to where it needs to be with Ritchie Bros.' full-service door-to-door logistics and shipping solutions. We take care of every step of the journey with our all-inclusive service to get your equipment across borders, continents and oceans quickly and efficiently
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.