192 Photos
2001 Cora Lynn Drilling CLD59-90 on 2002 Kenworth CLD59-90 8x4 Twin-Steer Drill Truck
Located
Pickardville, AB, CAN
Pickardville, AB, CAN
Usage
39,266 km
39,266 km
Serial number
1NKDLBTX72S965053
1NKDLBTX72S965053
Loading...
Detailed equipment information
Protected by IronClad Assurance
This lot has been given an extensive inspection by an industry expert. If you find it's not as described, file a dispute and we'll make it right.
ID number
#14954907
In yard
No
Features
PTO Driven, Mud Drill, Winch, Straight Down Outriggers, Rear Outriggers, Cat C-15 6 Cylinder Diesel Engine, Positive Air Shutoff, 19765 Engine hrs, Air Conditioner, Cruise Control, Engine Brake, Eaton Fuller RTLO-16918B 18-Speed Manual Transmission, Double Differential Locks, 37500 lb Front Axle, 46000 lb Rears, Spicer DS463P Drive Axles, 4.56:1 Axle Ratio, 83500 lb GVWR, Aluminum Front Wheels, 385/65R22.5 Front Tires, 11R24.5 Rear Tires, Dual Steering Boxes, Double Frame, Chalmers Rubber over Walking Beam Suspension, 310 in Wheelbase, PTO, Hydraulic Cylinder Drawworks, Cora Lynn Driller's Control Console, Range 3 DRILL DEPT - 600 METERS 30,000lb single line pull 60,000lb double line pull 6,000 lb torque on top drive. MAST: RANGE ILL - 85000 LB-37800DAN, (2) 5 1/2 X 8 GARDNER DENVER DUPLEX HYDRAULICALLY DRIVEN MUD PUMPS, MAIN WINCH 3,000 LB, WIRELINE WINCH, WINCH AND JIB BOOM, EQUIPPED WITH CORING ASSEMBLY AND WIRE LINE RETRIEVAL SYSTEM,
General Appearance
Serial Number / VIN
1NKDLBTX72S965053
Hour Meter / Odometer
39266 km-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Motor Vehicle Safety Standards Label
Yes
Paint
Sheet metal (fiberglass) condition
Steps/Ladders
Hand Rails
Glass
Drivers side front windshield is cracked
Exterior Lights Functional
Operational
Configuration
Engine
Emissions Status
No US EPA Label Present
Starter
Operational
Injector pump
Operational
Radiator
Oil Leaks
No dripping leaks
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Limited Function Check
The engine started and ran.
Cab
Engine Hours
19765 Engine hrs
Mirrors
Seats/armrests
Seat belts
Operational
Steering Controls
Horn
Air horn operational, Electric horn operational
Oil Pressure
The gauge registers in the operating range. 30 PSI Gauge inoperable
Engine Warning Lights
Operational
Gauges
Operational, Could not test all gauges
Engine Brake
Operational
Clutch
Engages
Air Conditioner
The ambient temperature is too cold to check.
Heater
Operational
Limited Function Check
The main components are in place and operational as noted.
Underbody
Steering Components
Steer Axle
Transmission
Operational
Power Take Off
Operational
Frame Condition
Front Axle
Rear Axle
Suspension Bushings
Wheel Condition
Wheel Studs
Hydraulic Tank
Control Station - Crane Lattice Boom
Controls Hydraulic or Air
Oil Pressure
The gauge registers in the operating range. 30 PSI Gauge inoperable
Gauges
Could not test all gauges
Hydraulics
Pumps (Hydraulics)
Hydraulic Motors
Valves
Hydraulic Tank
Hoses
Cylinder(s)
Cylinder Pins and Bushings
Limited Function Check
The hydraulic system was operational.
Chassis
Boom Condition
Additional information
Terms of Bidding and Sale
Payment
Items must be paid in full by Tuesday, 8 January 2030. Late fees will be applied after due date.
Shipping and pick up
- Buyers cannot remove their purchases from the auction site until their invoice is paid in full.
- Drivers must bring a copy of the Ritchie Bros. Auctioneers release ticket to pick up the item.
- We've partnered with trusted shipping vendors to make it easy for you to find the best transporters at the lowest prices. Request free quotes or get instant shipping estimates from our vendor’s websites.
Get a quote
Get your equipment to where it needs to be with Ritchie Bros.' full-service door-to-door logistics and shipping solutions. We take care of every step of the journey with our all-inclusive service to get your equipment across borders, continents and oceans quickly and efficiently
General
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Functions
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Dimensions
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.