117 Photos
2005 Kenworth Simple 16 Tipper Truck
Located
Phoenix, AZ
Phoenix, AZ
Usage
358,052 mi
358,052 mi
Serial number
1NKDXBE65R115685
1NKDXBE65R115685
Loading...
Detailed equipment information
Protected by IronClad Assurance
This lot has been given an extensive inspection by an industry expert. If you find it's not as described, file a dispute and we'll make it right.
ID number
#15318569
In yard
No
Features
Cat C15 6 Cylinder 15.0 L Diesel 475 hp Engine, 34330 Engine hrs, Air Conditioner, Cruise Control, Power Windows, Engine Brake, Eaton Fuller RTLO-16918B 18-Speed Manual Transmission, Dana D46-170HP Drive Axles, 3.91:1 Axle Ratio, 70220 lb GVWR, Air Ride Cab, Aluminum Wheels, 315/80R22.5 Front Tires, 11R22.5 Rear Tires, 3 Air Lift Pusher Axles, Dual Steering Boxes, Air Ride Suspension, 266 in Wheelbase, PTO, Bileau 17 ft Long x 4 ft High Steel Body, Electric Roll Tarp
General Appearance
Serial Number / VIN
1NKDXBE65R115685
Frame Stamp Serial Number/VIN Photo
VIN/SN_ISSUE- Frame stamp not found. Only partial vin available.
Hour Meter / Odometer
358052 mi-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Motor Vehicle Safety Standards Label
Yes
Paint
Sheet metal (fiberglass) condition
Left hood hinges area
Steps/Ladders
Hand Rails
Glass
Rock chips both windshields
Exterior Lights Functional
Operational
Brakes / Tires**
Steer Axle
- 9/32" Aluminum
- Drum
- Drum
- 19/32" Aluminum
Rear Axle
- 4/32" Aluminum
- Missing
- Drum
- Drum
- Missing
- 5/32" Aluminum
Rear Axle
- 4/32" Aluminum
- Missing
- Drum
- Drum
- Missing
- 0/32" Aluminum
Rear Axle
- 2/32" Aluminum
- Missing
- Drum
- Drum
- Missing
- 0/32" Aluminum
Rear Axle
- 10/32" Aluminum
- 8/32" Aluminum
- Drum
- Drum
- 7/32" Aluminum
- 7/32" Aluminum
Rear Axle
- 12/32" Aluminum
- 7/32" Aluminum
- Drum
- Drum
- 8/32" Aluminum
- 5/32" Aluminum
Engine
Emissions Status
No US EPA Label Present
A/C Compressor
Operational
Blow-by (subjective visual observation)
Minor
Starter
Operational
Air Compressor
Operational
Injector pump
Operational
Exhaust System
Radiator
Oil Leaks
No dripping leaks
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
Limited Function Check
The engine started and ran.
Cab
Engine Hours
34330 Engine hrs
Mirrors
Window Controls
Both Power
Seats/armrests
Seat belts
Operational
Steering Controls
Horn
Air horn operational, Electric horn inoperable
Oil Pressure
The gauge registers in the operating range.
Engine Warning Lights
Inoperable
Gauges
Operational
Gear Selector
Brake Control
Operational
Engine Brake
Not operationally checked
Clutch
Engages
PTO Control
Air engaged, Operational
ECM Miles
Unable to get ECM reading
Air Conditioner
Operational
Heater
Operational
Limited Function Check
The main components are in place and operational as noted.
Underbody
Steering Components
Steer Axle
Transmission
Operational
Power Take Off
Operational, Air operated
PTO Pump
Operational
Non-Driven Drop Axle (1)
Non-Driven Drop Axle (2)
Front Axle
Rear Axle
Limited Function Check
The drivetrain was operational.
Frame Condition
Suspension Springs/Hangers
Suspension Bushings
Air Bags
Left Steer Tire
Left Front Drive Tires
Left Rear Drive Tires
Right Rear Drive Tires
Right Front Drive Tires
Right Steer Tire
Wheel Condition
Wheel Studs
Hydraulic Tank
Hoses
Cylinder(s)
Cylinder Pins and Bushings
Limited Function Check
The hydraulic system was operational.
Park Brake
Held against power
Limited Function Check - Brakes
The brake system functioned, stopping and holding the machine.
Configuration
Skip
Tailgate
Tailgate Latch
Air operated, Not operationally checked
Support Frame
Hinge Points
Tarp
Electric Tarp, Not operationally checked
Oil Sample Analysis
Oil Sample Analysis
| engine | |
|---|---|
| date of analysis | Jun 25, 2026 |
| Silicon | 2.97 PPM |
| Tin | 1.57 PPM |
| Silver | 0 PPM |
| Aluminum | 0.95 PPM |
| Chromium | 1.1 PPM |
| Lead | 3.49 PPM |
| Copper | 8.21 PPM |
| Nickel | 0.3 PPM |
| Iron | 31.44 PPM |
| Glycol | NEG |
| Water | NEG |
| Fuel | <5% |
Additional information
Terms of Bidding and Sale
Payment
Items must be paid in full by Wednesday, 8 January 3000. Late fees will be applied after due date.
Shipping and pick up
- Buyers cannot remove their purchases from the auction site until their invoice is paid in full.
- Drivers must bring a copy of the Ritchie Bros. Auctioneers release ticket to pick up the item.
- We've partnered with trusted shipping vendors to make it easy for you to find the best transporters at the lowest prices. Request free quotes or get instant shipping estimates from our vendor’s websites.
Get a quote
Get your equipment to where it needs to be with Ritchie Bros.' full-service door-to-door logistics and shipping solutions. We take care of every step of the journey with our all-inclusive service to get your equipment across borders, continents and oceans quickly and efficiently
General
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Functions
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Dimensions
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.