132 Photos
2007 Putzmeister 38Z 38 m on 2007 Mack MR688 8x4 Concrete Pump Truck
Located
Newnan, GA
Newnan, GA
Usage
267,437 mi
267,437 mi
Serial number
1M2K197C97M037279
1M2K197C97M037279
Loading...
Detailed equipment information
Protected by IronClad Assurance
This lot has been given an extensive inspection by an industry expert. If you find it's not as described, file a dispute and we'll make it right.
ID number
#15768619
In yard
Yes
Features
Mack 6 Cylinder Diesel Engine, 22121.8 Engine hrs, Air Conditioner, Cruise Control, Engine Brake, Mack T310 10-Speed Manual Transmission, Aluminum Wheels, 425/65R22.5 Front Tires, 11R22.5 Rear Tires, Steerable Air Lift Pusher Axle, Camelback Spring Suspension, 272 in Wheelbase, PTO, 5643 Pump Hours, Radio and Cable Remote Controls, Outrigger Pads, Auto Lube, EBC (Ergonic Boom Control)
General Appearance
Serial Number / VIN
1M2K197C97M037279
Frame Stamp Serial Number/VIN Photo
Hour Meter / Odometer
267437 mi-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Motor Vehicle Safety Standards Label
No
Paint
Sheet metal (fiberglass) condition
Steps/Ladders
Hand Rails
Glass
Exterior Lights Functional
Operational
Brakes / Tires**
Steer Axle
- 12/32" Aluminum
- Covered
- Covered
- 15/32" Aluminum
Rear Axle
- N/A
- 16/32" Aluminum
- Covered
- Covered
- 20/32" Aluminum
- N/A
Rear Axle
- 11/32" Aluminum
- 12/32" Aluminum
- Covered
- Covered
- 7/32" Aluminum
- 14/32" Aluminum
Rear Axle
- 16/32" Aluminum
- 15/32" Aluminum
- Covered
- Covered
- 8/32" Aluminum
- 14/32" Aluminum
Engine
Emissions Status
No US EPA Label Present
A/C Compressor
Compressor will not engage
Blow-by (subjective visual observation)
Significant
Starter
Operational
Air Compressor
Operational
Injector pump
Operational
Exhaust System
Radiator
Oil Leaks
Side of engine, Oil Pan, Extensive engine oil overspray and film coating the entirety of the undercarriage and chassis components
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
Limited Function Check
The engine started and ran.
Cab
Engine Hours
22121.8 Engine hrs
Mirrors
Window Controls
Both Manual
Seats/armrests
Seat belts
Operational
Steering Controls
Horn
Air horn operational, Electric horn operational
Oil Pressure
The gauge registers in the operating range.
Engine Warning Lights
Operational
Gauges
Operational
Gear Selector
Brake Control
Operational
Engine Brake
Not operationally checked
Clutch
Engages
PTO Control
Operational
Air Conditioner
Fan blower functions but not blowing cool air
Heater
Operational
Limited Function Check
The main components are in place and operational as noted. Interior driver door damaged
Underbody
Transmission
Operational, Dripping leak
PTO Pump
Operational
Steer Axle
Front Axle
Rear Axle
Axle Bump Stops
In place
Limited Function Check - Carrier
The drivetrain was operational without a load.
Steering Linkage
Steering Wheel Play
Brake Type
Air
Master Cylinder/Brake Control
Brake Lines/Hoses
Park Brake
Held against power
Limited Function Check - Brakes
The brake system functioned, stopping and holding the machine.
Springs/Hangers Condition
Frame Condition
Cross Members
Automatic Lube System
Yes
Tyre Condition
Wheel Condition
Wheel Studs
Hydraulics
Pumps (Hydraulics)
Buildup
Hydraulic Motors
Valves
Hydraulic Tank
Hoses (Hydraulic)
Swing Motor
Boom Cylinders
Pump Cylinders
Lift Cylinders
Limited Function Check
Hydraulic system was operational during a limited function test. Unit was not fully set up to test all hydraulic functions.
Configuration
Pump Unit Serial Number
170207601
Pump Cell:
38Z
Pump Hours
5643 Pump Hours
Main Boom - Conveyor
38 m, 34 m
Wear Pads
Raise / Lower Mechanism
Hydraulic raise
Support Bents
Turn-table Bearing
Remote Control
Not operationally checked
Chassis
Outrigger Condition
Remote Control
Not operationally checked
Boom Condition
Boom Pipe
Receiver/Hopper
S Valve Wear Parts
Agitator
Concrete Pump Cylinders
Turn-table Bearing
Water Tank
Not operationally checked
Water Pump
Not operationally checked
Rear Body Steps
Body Decks and Sideboards
Oil Sample Analysis
Oil Sample Analysis
| engine | |
|---|---|
| date of analysis | Sep 10, 2026 |
| Silicon | 10 PPM |
| Tin | 0.14 PPM |
| Silver | 0.03 PPM |
| Aluminum | 1.33 PPM |
| Chromium | 0.03 PPM |
| Lead | 3.71 PPM |
| Copper | 1.05 PPM |
| Nickel | 0.26 PPM |
| Iron | 10.65 PPM |
| Glycol | NEG |
| Water | NEG |
| Fuel | <5% |
Additional information
Terms of Bidding and Sale
Payment
Items must be paid in full by Wednesday, 8 January 3000. Late fees will be applied after due date.
Shipping and pick up
- Buyers cannot remove their purchases from the auction site until their invoice is paid in full.
- Drivers must bring a copy of the Ritchie Bros. Auctioneers release ticket to pick up the item.
- We've partnered with trusted shipping vendors to make it easy for you to find the best transporters at the lowest prices. Request free quotes or get instant shipping estimates from our vendor’s websites.
Get a quote
Get your equipment to where it needs to be with Ritchie Bros.' full-service door-to-door logistics and shipping solutions. We take care of every step of the journey with our all-inclusive service to get your equipment across borders, continents and oceans quickly and efficiently
General
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Functions
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Dimensions
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.