128 Photos
2021 John Deere 750L XLT Crawler Dozer
Located
Melba, ID
Melba, ID
Usage
2,847 hrs
2,847 hrs
Serial number
1T0750LXCMF396153
1T0750LXCMF396153
Loading...
Detailed equipment information
This lot is protected by IronClad Assurance
Buy with confidence knowing that this lot has been given a full and detailed inspection by a qualified inspector.
ID number
#15726143
In yard
No
Features
Enclosed Cab, Air Conditioner, Requires Diesel Exhaust Fluid, 124 in Wide PAT Blade, 2 Cylinder Multi-Shank Ripper, 23.5 in Single Grouser Track Shoes
Notes
Selling from Temporary Offsite Location in Melba, ID, must be removed/picked up by September 11, 2026 COMES WITH IRONCLAD ASSURANCE. SUBJECT TO IDAHO SALES TAX.
General Appearance
Serial Number / VIN
1T0750LXCMF396153
Hour Meter / Odometer
2847 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Paint
Steps/Ladders
Hand Rails
Glass
Exterior Lights Functional
Operational
Safety
Travel Alarm
Operational
Horn
Operational
Seat belts
Operational
Current Safety Manual
Current Operator/Maintenance Manual
Control Station
Seats/armrests
Mirrors
Steering Controls
Hydraulic Controls
Powertrain controls
Dash Console
Engine Oil Pressure
The gauge registers in the operating range.
Engine Warning Lights
Operational
Gauges
Operational
Air Conditioner
Operational
Heater
Operational
Limited Function Check
The main components are in place and operational as noted.
Engine
Engine
No US EPA Label Present Requires Diesel Exhaust Fluid
A/C Compressor
Operational
Blow-by (subjective visual observation)
Minor
Starter
Operational
Exhaust System
Radiator
Oil Leaks
No dripping leaks
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
DEF / AdBlue Tank
Limited Function Check
The engine started and ran.
Drivetrain
Transmission
Operational
Service Brakes
Final Drives
Limited Function Check (Drivetrain-Track)
The drivetrain was operational without a load.
Hydraulics
Pumps (Hydraulics)
Valves
Hydraulic Tank
Hoses (Hydraulics)
Blade Lift Cylinders
Blade Angle Cylinders
Blade Tilt Cylinders
Ripper Cylinders
Limited Function Check
The hydraulic system was operational.
Chassis
Blade Condition
Blade Cutting Edge Condition
Reversible-not turned
Ripper
Push arm/C-frame condition
Push Arm Trunnions
Tilt/angle Linkage Pins and Bushings
Angle Linkage Pins and Bushings
Limited Function Check (dozer)
The main components were operational in a limited check.
Frame Condition
Belly pans
Specialty
Undercarriage
Pivot Shafts
Equalizer Bar Pivot Wear
Left Roller Frame
Left Track Tensioner
Left Track Pads
Left Grouser Height
38mm mm
Left Track Links
Left Track Bushings
Bushings have not been turned
Left Carrier Rollers
Left Track Rollers
Left Front Idler
Left Sprocket
Right Roller Frame
Right Track Tensioner
Right Track Pads
Right Grouser Height
38 mm
Right Track Links
Right Track Bushings
Bushings have not been turned
Right Carrier Rollers
Right Track Rollers
Right Front Idler
Right Sprocket
Additional information
Terms of Bidding and Sale
Payment
Items must be paid in full by Friday, 4 September 2026. Late fees will be applied after due date.
Shipping and pick up
- Buyers cannot remove their purchases from the auction site until their invoice is paid in full.
- Drivers must bring a copy of the Ritchie Bros. Auctioneers release ticket to pick up the item.
- We've partnered with trusted shipping vendors to make it easy for you to find the best transporters at the lowest prices. Request free quotes or get instant shipping estimates from our vendor’s websites.
Shipping estimator
Submit your item to VeriTread and receive free, no-obligation freight quotes.
General
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Functions
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Dimensions
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.