134 Photos
2022 Lindner Urraco 75DK Tracked Shredder
Located
Pennsauken, NJ
Pennsauken, NJ
Usage
1,028 hrs
1,028 hrs
Serial number
7890
7890
Loading...
Detailed equipment information
Protected by IronClad Assurance
This lot has been given an extensive inspection by an industry expert. If you find it's not as described, file a dispute and we'll make it right.
ID number
#15091231
In yard
No
Features
Dual Shaft Shredder, Scania NY9XL09.3DAA Engine, 7 ft 7 in x 9 ft 10 in Hopper, 47 in x 25 ft Discharge Conveyor
General Appearance
Serial Number / VIN
7890
CE Mark
CE Marked
Hour Meter / Odometer
1028 hrs-No guarantees made as to actual hours/miles/kilometers; the inspection report reflects what can be visually observed.
Paint
Sheet metal (fiberglass) condition
Electrical
Disconnect Switch
Functional
Cables and Connections
Control Station - Small
Gauges
Operational
Engine Oil Pressure
The gauge registers in the operating range.
Warning Lights
Operational
Limited Function Check
The main components are in place and operational as noted.
Engine
Emission Label
Blow-by (subjective visual observation)
No noticeable vapor or pressure
Starter
Operational
Injector pump
Operational
Exhaust System
Radiator
Oil Leaks
No dripping leaks
Fuel Leaks
No dripping leaks
Cooling System Leaks
No dripping leaks
Engine - Left Side
Engine - Right Side
DEF / AdBlue Tank
Limited Function Check
The engine started and ran.
Hydraulics
Pumps (Hydraulics)
Hydraulic Motors
Valves
Hydraulic Tank
Hoses
Conveyor Cylinders
Limited Function Check
The hydraulic system was operational.
Power Travel Drive
Hydraulic
Conveyor/Rollers
Raise / Lower Mechanism
Hydraulic raise
Support Bents
Conveyor Frame
Hopper
Length @ top: 9 ft 10 in, Width @ top: 7 ft 7 in, Side boards added
Conveyor Belt Condition
Conveyor Rollers
Belt Tensioner
Conveyor Drive Chains and Sprockets
Belt Magnet
Permanent magnet
Carrier
Brake Lines/Hoses
Not operationally checked
Limited Function Check
The main chassis components functioned when checked without a load.
Frame Rails/ Main Beams Condition
Undercarriage
Left Roller Frame
Left Track Tensioner
Left Track Pads
Left Grouser Height
21 mm
Left Track Links
Left Track Bushings
Bushings have not been turned
Left Track Rollers
Left Idler
Left Sprocket
Right Roller Frame
Right Track Tensioner
Right Track Pads
Right Grouser Height
21 mm
Right Track Links
Right Track Bushings
Bushings have not been turned
Right Track Rollers
Right Idler
Right Sprocket
Oil Sample Analysis
Oil Sample Analysis
| engine | |
|---|---|
| date of analysis | May 06, 2026 |
| Silicon | 1.69 PPM |
| Tin | 1.56 PPM |
| Silver | 0 PPM |
| Aluminum | 0.91 PPM |
| Chromium | 0.53 PPM |
| Lead | 0.8 PPM |
| Copper | 4.48 PPM |
| Nickel | 1.78 PPM |
| Iron | 6.56 PPM |
| Glycol | NEG |
| Water | NEG |
| Fuel | <5% |
Additional information
Terms of Bidding and Sale
Payment
Items must be paid in full by Wednesday, 8 January 3000. Late fees will be applied after due date.
Shipping and pick up
- Buyers cannot remove their purchases from the auction site until their invoice is paid in full.
- Drivers must bring a copy of the Ritchie Bros. Auctioneers release ticket to pick up the item.
- We've partnered with trusted shipping vendors to make it easy for you to find the best transporters at the lowest prices. Request free quotes or get instant shipping estimates from our vendor’s websites.
Get a quote
Get your equipment to where it needs to be with Ritchie Bros.' full-service door-to-door logistics and shipping solutions. We take care of every step of the journey with our all-inclusive service to get your equipment across borders, continents and oceans quickly and efficiently
General
The detailed equipment information is limited in scope, and Ritchie Bros. Auctioneers has not inspected any aspects or components of the equipment other than those expressly set forth herein. Unless expressly stated, we make no representations or warranties, express or implied, concerning the equipment or its components, including without limitation any representations or warranties concerning functionality, conformity or compliance with any safety standard or requirement of any applicable authority or regulatory body, fitness for any particular purpose, or merchantability. You are strongly advised to perform your own detailed inspection of the equipment prior to bidding.
Functions
Equipment is not tested under load or operated in all available gears. We make no representation or warranty that equipment is operating in accordance with manufacturers' specifications. No inspection has been performed with respect to any functionality aspect other than those expressly included herein. Only select photos have been provided for individual undercarriage components, and may not be indicative of the condition of the entire undercarriage as a whole.
Dimensions
Measurements are given as an estimate only. Actual loaded dimensions may vary based on truck/trailer height and the loaded machine configuration/position. It is the buyer's responsibility to measure all loads before leaving our auction site to ensure the load is safe for transport. All measurements should be verified by the buyer. Do not rely on these measurements for transportation purposes.